Sanyo VCC-HD4600P User Manual page 12

Perform the following connections according to the installation environment and application of your camera.
Basic Connections
A Power Connection
B
High-Definition Monitor Connection
C
Monitor connection for video adjustment
D Network Connection
Control Terminal Connections
A Alarm Input/Output Terminal Connections
B
Remote Zoom/Focus Adjustment Operation
Before attempting the following connections, be sure to turn off all components of your system.
Improper connection may cause smoke or failures. Before attempting to connect each system
component, carefully read the instruction manual that comes with it to familiarize yourself with the
correct connection procedure.
Attach the supplied power connector into the power terminal.
Loosen the screws on the side face of the connector, connect the power cables to it, and tighten the screws.
Connection method depends on the power supply (24 VAC or 12 VDC).
Connection to 24 VAC power supply
A
Although the power terminals have no polarity, the earth grounding wire must be connected to the COM (GND)
terminal.
Introduction 12/23