Video And Audio Settings - Sanyo VCC-HD4600P User Manual

The operation privileges of users who perform network operation are divided into 5 levels (admin, operator1,
operator2, guest, and download). Each user who attempts to access the camera will be authenticated by the user
name and password at login and granted an appropriate operation privilege.
Operation
Monitor live video.
Hearing sounds from camera
Sending audio messages to camera
Using digital PTZ function
Changing your own password
Selecting a live video stream
VIDEO & AUDIO SETTINGS
Configuring settings
Zoom/Focus/Preset operation button section
Remote Alarm Buttons
Emergency recording button
Downloading data recorded on camera to PC
○ : Available
□: Available (Excluding NETWORK SETTINGS)
–: Unavailable
△: Available only if permitted by a user with the admin privilege (hereinafter referred to as "admin user") on
the USER REGISTRATION screen
"download" is the operation privilege required for using the supplied downloader application (HDC
Downloader).
Disabling authentication check at login
You may set [ANONYMOUS USER LOG IN] to "ON" on the USER REGISTRATION screen to allow anyone to
access the camera without any authentication check at login.
In this case, all login users are regarded as guest users.
This means that users will be presented with an authentication check dialog box if they attempt to
perform any operation beyond the guest user privilege and must enter an adequate user name and
password to proceed.
The camera provides one factory-set default user per operation privilege. Besides these users, you can register up
to 20 custom users as client users.
Default users (5 users)
When you access the camera for the first time, login as an admin user and perform the necessary configurations.
Operation Privileges
admin operator1
○ ○
○ ○
○ ○
○ ○
○ △
○ △
○ ○
○ □
○ ○
○ ○
○ ○
– –
operator2 guest
○ ○
○ ○
○
–
○
–
△ △
△ △
– –
– –
○
–
○
–
○
–
– –
Before You Begin Network Operation 12/13
download
○
○
–
–
△
△
–
–
–
–
–
○