Sanyo VCC-HD4600P User Manual page 30

Setting Item
MOTION (Use of built-in
motion sensor)
DURATION (Alarm retention
duration)
A
Disabling motion detection in masked areas
B
Detecting motion in specific areas
C
Detecting motion with lines and areas drawn on the screen
In [MOTION], after selecting a motion sensor type, click
detailed configuration screen.
You can configure the camera to "automatically output alarm signals" or "remotely (manually) output alarm
signals".
You can configure the camera to automatically output an alarm signal when either of its alarm input terminals
receives an alarm signal.
Default Setting
OFF (Disables alarm
detection.)
5SEC (Ex.: Records alarm
video for 5 sec.)
Optional Setting
A
MASKING
B
DETECT
C
ANALYTICS
10SEC to 5MIN, CC (Retains an alarm state as long as
the motion alarm persists.)
DETAIL to configure the detection conditions on the
Quick Operation Guide 7/14