Sanyo VCC-HD4600P User Manual page 43

Hide thumbs Also See for VCC-HD4600P:
Table of Contents

Advertisement

To operate the camera via network operation, you must meet the following operating requirements.
PC:
Operating system: Windows XP Professional/Windows Vista
CPU:
Memory:
Network interface: 10BASE-T/100BASE-TX (RJ-45 connector)
Display card:
Graphics chip:
Web browser:
Use a LAN cable no longer than 100 m (109.4 yards) with the shield type CAT5 or higher.
The live video may be delayed depending on your system environment.
Use Windows Update to keep the operating system and browser up-to-date.
Note, however, that Internet Explorer 8 is not supported.
In the cases below, configure the Internet Explorer's settings by clicking [Tool] and then [Internet Options].
When accessing the camera using SSL encryption for video signal transmission
1
Click the [Advanced] tab.
2
Make sure that the [Use SSL 2.0] and [Use SSL 3.0] check boxes under [Security] are selected. If
deselected, select them.
When the video refresh is unstable
1
Click the [General] tab.
2
Under [Temporary Internet Files], click [Settings].
For Windows Vista, click [Settings] under [Browsing history].
3
Set the slider under [Amount of disk space to use:] to a low value (the minimum value recommended by
Microsoft).
When a Java Script "Runtime Error" is displayed during operation
1
Click the [Advanced] tab.
2
Under [Browsing], deselect the [Display a notification about every script error] check box.
3
Select the [Disable script debugging] check box.
IBM PC/AT compatible
Core2Duo E6700 2.66 GHz or higher
Windows XP: 1GB or more
Windows Vista: 2GB or more
1920×1200 pixels or higher
ATI RADEON HD2600 series or higher
nVIDIA GeForce 8600 series or higher
nVIDIA Quadro FX550 series or higher
Internet Explorer Ver. 6.0 SP2 or higher, or Internet Explorer Ver. 7.0
Before You Begin Network Operation 6/13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents