Battery Indicator; Auto Power Off Function; Resume Function - Sanyo ICR-FP600D Instruction Manual

All manuals and user guides at all-guides.com
Battery indicator
Remaining battery power is displayed.
>
Battery fully charged
If the battery is exhausted, "
automatically.
The battery indicator display varies according to surrounding temperature
Note
and status of use.
Use this indicator as reference.
Note
- If is indicated, replace the battery promptly.
- Even if the remaining quantity of battery power is very low,
turning the power off and on may cause a larger quantity to
be indicated than is actually available. Note that if you record
or use timer recording in this state, recording may stop in the
middle due to lack of battery power.
Auto power off function
If the unit is left on for 30 minutes in the "stop" state, the power turns off
automatically.
To turn the power on again, set the Power/Hold switch to "OFF" and then to"ON".
Resume function
This function remembers the state of folder, file, and playback position selected
before the power turns off and then starts the unit in the same state when the
power is turned on again.
In the following cases, however, the resume function does not operate.
-This unit is connected to a PC.
-The battery or the SD card is removed without turning off the power.
-The SD card is inserted after the power is turned on.
GB-13
> >
Low battery
" is displayed and then the power turns off