Turning On/Off The Recording Led; Changing The Battery Type - Sanyo ICR-EH800D Instruction Manual

Turning on/off the recording LED

You can use this setting to turn on or off the
recording LED for use during recording.
Turn on the power, and press
1
the MENU/PLAY LIST button.
Press the VOL (+/–) button to
2
select "COMMON MENU", and
then press the
Press the VOL (+/–) button to
3
select the "REC LED" setting,
and then press the
button.
Press the VOL (+/–) button to
4
select "OFF" or "ON", and then
press the
A
OFF
ON
OFF: During recording, the recording LED
does not light.
ON: During recording, the recording LED
lights.
Press the MENU/PLAY LIST button
to exit the menu.
106
/OK button.
/OK
/OK button.
SD ST
MIC
【REC LED】

Changing the battery type

Use this setting to specify the type of battery
to use (eneloop battery or alkaline battery).
Turn on the power, and press
1
the MENU/PLAY LIST button.
Press the VOL (+/–) button to
2
select "COMMON MENU", and
then press the
Press the VOL (+/–) button to
3
select the "BATTERY SETTING"
setting, and then press the
/OK button.
Press the VOL (+/–) button to
4
select a battery type, and then
press the
Battery setting
SD
A
MIC
【BATT. SETTING】
eneloop
ALKALINE
Press the MENU/PLAY LIST button
to exit the menu.
• If the setting does not match the actual
battery in use, the battery indicator will
not be correctly displayed.
/OK button.
/OK button.
ST
: eneloop
e
:ALKALINE
A