Power Supply - Sanyo ICR-B150 Instruction Manual

POWER SUPPLY

Battery
1. Open the battery compartment lid.
2. Install two "AAA" batteries (not
supplied). Observe proper polar-
ity.
Battery indicator (
The line of rectangles is the battery gauge. Black rectangles show the bat-
tery condition while the unit is operating.
: Full, good condition
("LOW BATT" appears.): Weak or exhausted batteries, must be re-
placed.
CAUTION:
Remove the batteries if the unit will not be used for a month or longer.
IMPORTANT NOTE:
SPENT OR DISCHARGED BATTERIES MUST BE RECYCLED OR DIS-
POSED OF PROPERLY IN COMPLIANCE WITH ALL APPLICABLE
LAWS.
FOR DETAILED INFORMATION, CONTACT YOUR LOCAL COUNTY
SOLID WASTE AUTHORITY.
AC adaptor
Connect the AC adaptor (SANYO Model No. 3CV-120US, not supplied) to
the EXT DC 3V jack. (The batteries are automatically disconnected and the
battery indicator does not light.)
• The center pin of the EXT DC 3V jack is positive (+).
5
)