Table of Contents
Advertisement
Adjust the recording level (only if the
4
"SCENE SELECT" setting is set to
"MUSIC" or the "MIC ALC" setting is
"OFF").
Use the following procedure to adjust the recording
level.
Press the REC button.
The recording standby screen appears.
• In this state, recording has not started.
• You can use the stereo earphones to monitor
the recording sound. Use the VOL (+/–) button
to adjust the sound volume.
When recording musical instruments,
etc., produce sound in the direction of
the microphone.
The level meter extends to the right as the
recording level increases. The further it extends
to the right, the louder sound the microphone
collects.
Press the
recording level.
• These buttons allow you to adjust the
displayed recording level from 0 to 30.
The recording level can be set for each
microphone sensitivity. If the recording level is
set to 0, no sound will be recorded.
Recording
level
MIC SENS.
(to be continued on next page)
36
/
button to adjust the
1
30 1
LOW
30
HIGH
Advertisement
Table of Contents
