Sanyo ICR-EH800D Instruction Manual page 129

Recorded sound is distorted (cracking sound).
Cause The microphone sensitivity is not appropriate.
Solution • Change the "MIC SENS." setting to "LOW". If you still hear cracking sound, change the
"LOW CUT FILTER" setting to "ON", "MIC ALC" setting to "OFF", and adjust the recording
level. Then, try to record again.
See "Changing the microphone sensitivity" on page 88.
See "Setting the low cut filter" on page 91.
Sound skipping happens to recorded file.
Cause • The microSD card has been formatted by another device (e.g. PC) instead of the unit.
• The memory is increasingly fragmented.
Solution Use the unit to format the microSD card again.
See "Formatting the internal memory or a microSD card" on page 79.
When the unit is connected to your PC, the connection icon does not appear on the
unit's screen.
Solution Depending on the PC, the PC may not recognize the unit, or the connection icon may not
appear on the unit's screen. If this happens, disconnect the unit from the PC and then
connect again.
The calendar is not displayed correctly.
Solution Set the date and time again.
See "Setting the calendar (date and time)" on page 28.
Files are erased, but the free space does not increase.
Cause The "RECYCLE" setting is "ON".
Solution Empty the RECYCLE folder.
See "Emptying the RECYCLE folder" on page 74.
129