Sanyo ICR-EH800D Instruction Manual page 45

Turn on the power.
2
Turning on the power (page 22)
Slide the LINE/MIC switch to LINE.
3
Changing the recording mode (page 87)
Start playing the external sound source,
4
and press the REC button on the unit to
start recording.
• The recording will be stored in the LINE (L)
folder.
• For recording from external input, the recording
level on the unit cannot be adjusted.
• Before the real recording, first test it so that
you can adjust the external device for desired
quality.
If the sound volume is too high, cracking sound
will occur.
To stop recording, press the STOP/BACK
5
button. Also, stop playback on the
external device.
• If the sound volume on the external device has already been set to its maximum but yet
the sound in line-in recording is small, slide the LINE/MIC switch to MIC and adjust the
recording level, then perform recording again. In this case, recording will be saved in the
selected microphone folder (A to D). ( page 17)
45