Sanyo ICR-EH800D Instruction Manual page 134

Recording frequency
(During external microphone
recording)
(During built-in microphone
recording)
Format
Playback format
Playback frequency
Sampling frequency
Playback bitrate
Input/output sockets
Operating temperature
Rated output (headphones)
Power source
Battery duration
(Recording time)
(Playback time/
stereo earphones)
134
: 40 to 21,000Hz (for PCM 44.1kHz 16bit)
40 to 20,000Hz (for MP3 320kbps)
40 to 20,000Hz (for MP3 192kbps)
40 to 15,000Hz (for MP3 128kbps)
40 to 7,500Hz (for MP3 64kbps)
40 to 6,500Hz (for MP3 32kbps)
: 60 to 20,000Hz (for PCM recording)
* The frequency upper limit of MP3 recording follows each recording
mode of external microphone recording. Also, the lower limit for each
recording mode is 60 Hz.
: MP3, PCM (WAV)
: MP3 (MPEG1 LAYER3, MPEG2 LAYER3, MPEG2.5 LAYER3), WMA,
PCM (only files recoded on the unit)
: 20 to 21,000Hz (for 44.1kHz sampling frequency)
: 16 to 44.1 kHz
: 16 to 320 kbps (MP3)
32 to 192 kbps (WMA)
* Depending on the file, normal playback may not be possible.
: USB, stereo headphones mini-plug 3.5 , stereo microphone (doubling
as line input) mini-plug 3.5 , microSD card slot
: +5°C to +35°C
: 10mW + 10mW (when 16 load, JEITA/DC)
: AAA alkaline battery
: [MP3] 64 kbps
Stereo mode
[PCM] 44.1 kHz 16bit
(Recording environment: Recording LED off, backlight off, no recording
monitor, MIC ALC ON)
: [MP3] 64 kbps
Stereo mode
[PCM] 44.1 kHz 16bit
(Playback environment: Stereo Earphones playback, backlight off,
SOUND EQ = FLAT)
1
Approx. 26 hours (alkaline battery)
Approx. 19 hours (eneloop battery)
Approx. 10 hours (alkaline battery)
Approx. 9 hours (eneloop battery)
Approx. 23 hours (alkaline battery)
Approx. 18 hours (eneloop battery)
Approx. 11 hours (alkaline battery)
Approx. 10 hours (eneloop battery)