7.2.7 Dimmer
This operating mode can only be activated when the device is operating in stand alone mode
or as master in a master / slave combination. This setting is only relevant if the device is not
controlled via DMX.
1.
Press [Mode] repeatedly until the display shows 'Dimmer' .
2.
Press [Setup] repeatedly until the display shows the desired submenu.
Menu level 2
'Red'
'Green'
'Blue'
'White'
3.
Use [Up] and [Down] to select a value between '000' and '255' to set the intensity of the
selected colour.
Function
Intensity red
Intensity green
Intensity blue
Intensity white
Matrix Blinder 5x5 RGBWW
Blinder
Operating
27