Overview Introduction The EVKT-MP8860 is an evaluation kit for the MP8860, a synchronous, 4-switch, integrated, buck- boost converter capable of regulating the output voltage from a wide 2.8V to 22V input voltage range with high efficiency. The MP8860 provides flexible system configurations via the I C.
USER GUIDE – MP8860 EVALUATION KIT (EVKT-MP8860) Features and Benefits The MP8860 is highly customizable. Users can configure the MP8860 via the MPS I2C GUI. ⚠️ All changes made in I2C mode will NOT be retained once the EVB is powered down.
EVB, the PC, and its supporting accessories. It provides I2C and PMBus capabilities. Together with MPS Virtual Bench Pro and GUI tools, it provides a quick and easy way to evaluate the performance of MPS digital products. For more details, refer to the EVKT-USBI2C-02 datasheet.
Section 2. Software Requirements 2.1 Software Installation Procedure Programming occurs through the MPS I2C GUI. Follow the instructions below to install the software. 1. Double click the .exe file to open the set-up guide (see Figure 4). 2. Follow the prompts in the set-up guide.
EVKT-USBI2C-02 Driver Problem Note: USBI2C-02 and USBI2C-01 drivers are not compatible. USBI2C-02 uses USBXpress and USBI2C uses Cyusb3. USBI2C-02 is the recommended device for the MPS PMBus and I2C. EVKT-USBI2C-01 In case that the USBI2C-01 driver is not properly installed, manual installation is required.
Need help?
Do you have a question about the EVKT-MP8860 and is the answer not in the manual?
Questions and answers