Overview Introduction The EVKT-MP8862 is an evaluation kit for the MP8862, a synchronous, 4-switch, integrated, buck-boost converter capable of regulating the output voltage from a wide 2.8V to 22V input voltage range with high efficiency. The MP8862 provides flexible system configurations via the I2C. This kit allows for quick evaluation of the MP8862, supporting a wide range of designs.
USER GUIDE – MP8862 EVALUATION KIT (EVKT-MP8862) Features and Benefits The MP8862 is highly customizable. Users can configure the MP8862 via the MPS I2C GUI. ⚠️ All changes made in I2C mode will NOT be retained once the EVB is powered down.
PC, and its supporting accessories. It provides I2C and PMBus capabilities. Together with MPS Virtual Bench Pro and GUI tools, it provides a quick and easy way to evaluate the performance of MPS digital products. For more details, refer to the EVKT-USBI2C-02 datasheet.
Section 2. Software Requirements 2.1 Software Installation Procedure Programming occurs through the MPS I2C GUI. Follow the instructions below to install the software. 1. Double click the .exe file to open the set-up guide (see Figure 4). 2. Follow the prompts in the set-up guide.
EVKT-USBI2C-02 Driver Problem Note: USBI2C-02 and USBI2C-01 drivers are not compatible. USBI2C-02 uses USBXpress and USBI2C uses Cyusb3. USBI2C-02 is the recommended device for MPS PMBus and I2C. EVKT-USBI2C-01 In case that the USBI2C-01 driver is not properly installed, manual installation is required. Follow the steps below.
Need help?
Do you have a question about the EVKT-MP8862 and is the answer not in the manual?
Questions and answers