Table of Contents
Advertisement
Only cover the burner with one layer of coals. Arrange the ember chips
on top of the burner tray. DO NOT cover the pilot with logs.
WARNING: This appliance is intended for use only with the included
Montigo burners and accessories. Never install or add any additional
or alternative media, rock wool or other material in this appliance. The
use of additional or alternative materials may pose potential safety
hazards, damage to the appliance, and void manufacturer's warranty.
38" Split Oak Logset Installation
A
B
F
Step 1: Log A is placed at the rear center of the media tray. Log B is
placed at the left corner of the firebox, with the charred side facing the
middle of the media tray.
Step 2: Log E is placed at the right corner of the firebox, with the
charred side facing the middle of the media tray
Step 3: Place log H diagonally in front of log a, in the center of the
media tray.
XG0230 - 052020
C
D
I
H
E
G
Step 4: Log I rests diagonally on log H with the other end resting on log E
Step 5: Log F is placed diagonally directly in front of log B, with the
forked end down. Log C is placed diagonally on log E, charred
end down
Step 6: Rest log G horizontally next to log F
Step 7: Place log D on top of log E, charred end in.
Installation
DRSQ
38
45
Advertisement
Table of Contents
