ICP DAS USA ET-2254 Quick Start Manual page 8

Click the "I/O Settings" tab to set the Universal DIO.
5)
In the "Force DI/DO Mode" section, select the "Static" from the drop down
6)
options and check the checkbox for "Ch0" to set Ch0 is DI Port then click the
"Update Settings" button to save the revised settings to the ET-2254(P)
module.
7) Click the "Home" tag to
Digital Input and Output functionality.
In the "Digital I/O" section, click the "DO1" button to "ON" (Red) and verify
8)
that the "DI0" LED status for "high (green)".


Technical support:


allow a simple test to be performed to verify the
service@icpdas.com P8