ICP DAS USA ET-2254 Quick Start Manual page 2

1
Connecting the Power and Host PC
1)
Make sure your PC has workable network settings.
Disable or well configure your Windows firewall and Anti-Virus firewall first,
else the "Search Servers" on Chapter 5 may not work. (Please contact
with your system Administrator)
2)
Connect both the ET-2254(P) and your PC to the same sub network or
the same Ethernet switch.
3)
Supply power (+10~+30 V
Verify that the "PWR" LED indicator
4)
on the ET-2254(P) is flashing.
Technical support:
) to the ET-2254(P).
DC
service@icpdas.com
Red, OK
P2