5
Configuring Network Settings
1) Run the eSearch Utility.
The eSearch Utility is located at:
http://ftp.icpdas.com/pub/cd/6000cd/napdos/software/esearch/
2) Click the "Search Servers" to search your ET-2254(P).
3) Double-click your ET-2254(P) to configure the settings
Factory Default Settings of ET-2254(P):
IP Address
Subnet Mask
Gateway
4) Contact your Network Administrator to obtain a correct network
configuration (such as IP/Mask/Gateway). Enter the network settings
and click "OK".
seconds later.
Technical support:
192.168.255.1
255.255.0.0
192.168.0.1
Note: The ET-2254(P) will use the new settings 2
service@icpdas.com
P6