Cisco NCS 4206 Installing page 52

Installing Patch Panel
Figure 38: Patch Panel Front View with Brackets and Guides
Figure 39: Patch Panel Rear View with Brackets and Guides
Step 5 Secure the guides to the brackets with the screws. The recommended maximum torque is 28 in.-lb (3.16 N-m).
Step 6
Cable brackets should be assembled according to the PID used as different PIDs have different set and quantity
Note
of brackets. Refer figures 110 to 115 for PID and cable bracket details.
Position the patch panel with brackets and guide onto the rack and secure with screws provided. The recommended
maximum torque is 28 in.-lb (3.16 N-m), see the figure below.
Installing the Cisco NCS 4206
52
Installing the Cisco NCS 4206