Cisco NCS 4206 Installing page 36

Connecting to the Console Port using Mac OS X
Step 3
To communicate with the chassis, start a terminal emulator application, such as Microsoft Windows HyperTerminal.
This software should be configured with the following parameters:
• 9600 baud
• 8 data bits
• no parity
• 1 stop-bit
• no flow control
Figure 28: Connecting the USB Console Cable to the Cisco NCS 4206
1 USB Type-A console port
3 USB Type-A
Connecting to the Console Port using Mac OS X
This procedure describes how to connect a Mac OS X system USB port to the console using the built in OS
X Terminal utility.
Step 1
Use the Finder to go to Applications > Utilities > Terminal.
Step 2 Connect the OS X USB port to the .
Step 3
Enter the following commands to find the OS X USB port number:
Example:
Installing the Cisco NCS 4206
36
2 USB 5-pin mini USB Type-B to USB Type-A console cable
— —
Installing the Cisco NCS 4206