Gps Commands; Power Commands - AML Oceanographic AML-6 RT User Manual

reset factory
reset user
display memory
display version
display volt
secure on

5.10 GPS commands

Command
set gnss mgadbd [y | n]
set gnss offline [y | n]

5.11 Power commands

Command
poweroff
hibernate <minutes>
set wakeonpower [y/n]
AML Oceanographic Ltd.
Restore the device's factory settings.
Restore the device's user settings.
Print the SD card's total and used memory in bytes.
Print the version header, including the model name,
firmware version, serial number, and total space of the
installed SD card.
Print the current battery voltage.
Enables the user to send "secure" commands. Secure mode
is not persistent through multiple telnet sessions or a power
cycle.
Description
Enable/disable GPS database dump to enable GPS warm
start. If enabled, the GPS module will store almanac data
that will improve lock times after a recent fix has been lost.
Enabling this feature generally improves GPS lock times.
Note: This is a secure command.
Enable/disable GPS offline assist. Requires connecting to
Sailfish with an active internet connection at least once
every 5 days. Offline data will help improve lock times on
power up.
Note: This is a secure command.
Description
Turn the instrument off indefinitely, until the power dial
switch is toggled or external power cycled.
Turn the instrument off for a set amount of minutes.
Once enabled, the instrument will stay on until a Power Off
command is issued or poweroff timeout has occurred.
Note: This is a secure command.
34/44