Derived Parameters - AML Oceanographic AML-6 RT User Manual

set monitor log [y | n]
set monitor delimiter [comma | tab | space |
colon]
set monitor checksum [y | n]
display monitor
Additional monitor commands are described in

3.2.4 Derived Parameters

Command
set scan <parameter>
AML Oceanographic Ltd.
enabled the instrument will start monitoring
when powered on.
This command applies only to monitoring via
serial connection
Enable/disable monitor log mode. When
enabled, the instrument will log data when
monitoring. Halting monitoring will halt
logging.
Note: If LOG MODE is set to AUTO the
instrument will commencing logging when in
water regardless of monitor status.
Set the delimiter of the monitor output.
Enable/disable a 8 bit XOR checksum in the
monitor output. The checkum is appended to
each scan preceded by a "*".
Ex.
>mon
1450.132,14.543*2B
1451.122,15.133*29
Note that checksum does not appear in log
files.
Display the current monitor settings.
5.2 Monitor commands.
Description
Add a parameter to be included in the log file and
monitor output.
Optional Parameters:
date
time
bat (battery)
dep (calculated depth)
sal (calculated salinity)
den (calculated density)
sound (calculated sound velocity)
25/44