Log File Format/Monitor Output - AML Oceanographic AML-6 RT User Manual

set monitor log [y | n]
set monitor delimiter [comma | tab | space |
colon]
set monitor checksum [y | n]
set monitor format [columns | amlx]
display monitor

5.3 Log File Format/Monitor Output

Command
set scan <parameter>
AML Oceanographic Ltd.
This command applies only to monitoring via
serial connection
Enable/disable monitor log mode. When
enabled, the instrument will log data when
monitoring. Stopping monitor will halt logging.
Note: If LOG MODE is set to AUTO the
instrument will commence logging when in
water regardless of monitor status.
Set the delimiter of the monitor output.
Enable/disable a 8 bit XOR checksum in the
monitor output. The checkum is appended to
each scan preceded by a "*".
Ex.
>mon
1450.132,14.543*2B
1451.122,15.133*29
Set the monitor output format. See
B for a description of the columns and AMLx
formats.
Note that checksum does not appear in log
files.
Print the current monitor settings.
Description
Add a parameter to be included in the log file
and monitor output.
Optional Parameters:
date
time
bat (Battery)
dep (Calculated Depth)
sal (Calculated Salinity)
den (Calculated Density)
sound (Calculated Sound Velocity)
Appendix
31/44