Miller XMT 400 CC/CV Owner's Manual page 8

1 2 3
1 2
2 3
4 5
V = 0
V
> 60 s
3 4
1
S-179 309
4 5
1 Warning! Watch Out! There
are possible hazards as
shown by the symbols.
2 Electric shock from wiring can
kill.
3 Disconnect input plug or
power before working on
6
machine.
4 Hazardous voltage remains
on input capacitors after
power is turned off.
5 Always wait 60 seconds after
power is turned off before
V
working on unit.
S-179 190
6 Check input capacitor voltage,
and be sure it is near 0 before
touching parts.
1 Warning! Watch Out! There
are possible hazards as
shown by the symbols.
2 When power is applied failed
parts can explode or cause
other parts to explode.
5
3 Flying pieces of parts can
cause injury.
4 Always wear a face shield
when servicing unit.
5 Always wear long sleeves and
button your collar when
servicing unit.
S-179 304
1 Warning! Watch Out! There
are possible hazards as
shown by the symbols.
2 Falling equipment can cause
injury and damage to unit.
3 Always lift and support unit
using both handles.
4 Use a proper cart to move
unit.
5 Do not use one handle to lift
or support unit.
1/96
1/96
1/96
OM-139 426 Page 5