Table of Contents
Advertisement
ACPI Standby State This item allows you to select the ACPI Suspend
Power Management/
Video Power Down
Mode
Hard Disk Power
Down Mode
Standby Time Out
(Minute)
Suspend Time Out
(Minute)
Power Button Function Allows you to set power Button function.
Restore on AC/Power
Loss
Resume on Ring Allows you to enable / disable the Resume on Ring
Resume on LAN/PME# Allows you to enable / disable the Resume on LAN
type. However, this mainboard only supports S1
(POS) for Power on Suspend under ACPI mode.
Allows you to enable / disable the Power manage-
ment / Advanced Power Management function.
APM
Allows you to select the Video Power Down Mode.
Choices: Disabled; Standby; Suspend
Allows you to select the Hard Disk Power Down
Mode.
Choices; Disabled; Standby; Suspend
To set the duration of Standby Time Out.
Choices: 1; 2; 4; 8; 10; 20; 30; 40; 50; 60
To set the duration of Suspend Time Out.
Choices: 1; 2; 4; 8; 10; 20; 30; 40; 50; 60
Choices: On/Off; Suspend
Allows you to set the restore state from AC/Power
Loss.
Choices: Last State; Power Off; Power On
Signal function.
An input signal on the serial Ring Indicator (RI) Line
(in other words, an incoming call on the modem)
awakens the system from a soft off state.
(PCI LAN) and PME function.
73
Chapter 4 BIOS Setup
Advertisement
Table of Contents
