Table of Contents
Advertisement
2-8.3 JAGP1 & JAGP2: AGP Voltage Select
The default voltage 1.5V at AGP slot is
for normal operation of the supported
AGP 4X. In some case, when you try to
do CPU overclocking, you may need to
raise the transfer rate of the AGP
interface. JAGP1 & JAGP2 are de-
signed to provide settings for selecting
a higher AGP voltage so as to raise the
speed of the AGP interface.
Warning: By selecting a higher
voltage than the default , you
are risking the stability of your
system.
2-8.4 JDIMM1 & JDIMM2: DIMM Voltage Select
The default voltage 2.5V at DIMM sock-
ets is for the optimum operation of the
supported DDR DRAM. In some case,
when you are doing CPU overclocking,
you may find a higher DIMM voltage work
will better. JDIMM1 & JDIMM2 are de-
signed to provide settings for adjusting
the DIMM voltage so as to optimize the
operation stability.
Warning: In selecting a higher
voltage than the default , you
are risking the stability of your
system.
Chapter 2 Hardware Setup
JAGP1 & JAGP2
AGP Voltage Select
AGP
JAGP1
Voltage
1.5V
(default)
1
1.6V
1
1.7V
1
JDIMM1 & JDIMM2:
DIMM Voltage Select
DIMM
Voltage JDIMM1 JDIMM2
2.5V
(default)
1
2.6V
1
2.7V
1
29
JAGP2
1
1
1
1
1
1
Advertisement
Table of Contents
