Installation: Mechanical
4. Position isolator pads or spring isolators beneath the
chiller feet (refer to
"Unit Isolation," p. 23
instructions).Follow instructions provided by the spring
isolator manufacturer, being careful to not damage
isolator adjustment screw.
Figure 8. Typical rigging arrangements
X
H
Note: Use lifting lug if present.
22
5. Once the isolators are in place, lower the chiller—
for
6. When lift is complete, detach the rigging shackles and
Y
Lifting
beam
Safety
chain
A
working from end to end—in small increments to
maintain stability.
safety chain.
CDHH-SVX003C-EN