Expression; Loop Order - GigRig G3 User Manual

THE ADVANCED SWITCHING SYSTEM
Bank Down Button
You now have the ability to assign both a BANK UP and a BANK DOWN button to any preset on G3.
To assign the Bank Down button;
1. Go to Global in the menu
2. Go to bank settings
3. Select either bank up or bank down and assign the desired footswitch for each.
The Bank Down works exactly opposite to the Bank Up footswitch. Press once to bank down, press and hold to
bank up.
G3 Remote/Stage Midi Code
This midi mode enables you to control another G3 re motley.
The PC* and CC* enable the two units to talk to each other without creating a MIDI message feedback loop.
CC 00 = G3 Bank, Number = Bank number (0~99)
CC 32 = Preset, Number = Preset number (0~28)
*Please note – every time you send a bank message to G3 it will load all the presets for that bank. We suggest
that if you are loading songs remotely you only need to have a single preset that sends the bank/song CC
message. For example, preset 1.

5.2.3 EXPRESSION

EXPRESSION PEDAL PRE/POST GAIN
You also have the option to set up the Expression Pedals to control the PRE and POST GAIN in G3. for example,
for volume control, by using the PRE GAIN to control the levels going into your effects or using the POST GAIN
as a master output control.
IMPORTANT – In up to date versions of software such as 560 (that comes pre-installed on your G3) and above,
set the TOE value to 95 for unity gain. Higher values will add gain.
Remember you must have your Pre or Post Gain selected on this preset to be able to control the levels with your
Expression Pedal.

5.2.4 LOOP ORDER

THE GIGRIG G3 USER MANUAL
(4)
a. Select EXPRESSION from the Main Menu.
b. Scroll to select either PRE GAIN or POST GAIN.
c. Select your Heel and Toe values. (Toe 95 for unity).
Your expression pedal will now control Pre and/or Post Gain levels.
20