GigRig G3 User Manual page 13

THE ADVANCED SWITCHING SYSTEM
For example, let's say you have a delay in LOOP 9 in a standard preset. If you engage a StompBox mode preset
that includes the delay in loop 9, you can use the Stompbox mode to remove the delay from the standard preset.
PLEASE NOTE – Subtractive Stomp is disabled as standard on all presets. If you wish to enable this feature on
any given preset, simply select the preset, enter the menu and scroll down until you see NEG STOMP. Scroll to
the right to enable.
The loops/functions included in the StompBox mode preset will be removed from the standard preset when the
StompBox mode footswitch is pressed a second time. i.e., the first press engages the loop, the second press
disengages it.
PLEASE NOTE - this means if either of the outputs are included in the Stompbox mode preset, pressing this
footswitch a second time will result in no sound as it will remove the outputs from the standard preset, so it's
important to ONLY include the loops and functions you want to add/subtract on top of a standard preset.
To edit a STOMPBOX MODE enabled preset:
Press the Stompbox enabled footswitch, then press Stompbox mode (yellow LED next to the footswitch will turn
off).
Then press the footswitch a second time so it is the only footswitch selected. Then you can programme the
preset as normal.
13
THE GIGRIG G3 USER MANUAL