GigRig G3 User Manual page 17

THE ADVANCED SWITCHING SYSTEM
Scroll right again (4) to select the Value (if CC is selected, scroll right again to select the CC number).
Choose the MIDI command that you want to send - , this example we will choose PC + then scroll to the right to
choose the programme change number.
For example, if you want to programme channel 7 and would like Preset
Number 1 on G3 to send MIDI programme 7 on MIDI channel 3, you will
need to:
a. Select a MIDI command (1-20).
b. Edit MIDI Channel (in this instance, to MIDI channel 3).
c. Set Type to PC +.
d. Set Value to 7.
e. Press DEEP EDIT. Push button 3 to exit.
You can repeat this process up to 20 separate times per individual preset.
THE GIGRIG G3 USER MANUAL
MIDI Menu screen – to edit, scroll down
MIDI messages.
Scroll right (4) to edit the selected MIDI command.
Scroll right again t (4) to turn the MIDI on and select the type of PC
(Programme Change), CC (Control Change) message you want using
footswitches 1 and 2. (Standard MIDI messages use the + symbol).
To Set Up Control Change (CC) Messages:
a. Select a MIDI command (in this example, MIDI command 2 is selected)
b. Scroll right to set Type to 'CC+'
c. Scroll right again to set VALUE and NUMBER.
(2) to each of the 20 available
17