Table of Contents
Advertisement
THE ADVANCED SWITCHING SYSTEM
Stomp Box Modes
Standard
– Cleared by pressing a normal preset or the footswitch itself.
Sticky –
Only cleared when the footswitch itself is pressed.
Flash –
Only activates while the footswitch is pressed.
Flip/Flop –
Switch between multiple StompBox mode presets. Cleared by pressing a normal preset or the
footswitch itself.
Flip/Flop Sticky –
This is a combination of the Flip/Flop and Sticky functionalities. A footswitch in this mode is
only cleared when the footswitch itself is pressed.
2.6. NAVIGATING THE DEEP EDIT MENU
Editing menu options include:
MIDI, PARALLEL & WET/DRY SIGNAL PATHS, DELAY/REVERB TRAILS, PRESET NAMES, BLUETOOTH
SOFTWARE UPDATES & BACKUPS, STOMPBOX MODES, PRESET BANK COPY & PASTE, SCREEN BRIGHTNESS,
etc.
The Editing menu in G3 has been designed to be as intuitive as possible, but for additional guidance please
refer to the full manual.
THE GIGRIG G3 USER MANUAL
Press the
button on the left-hand side of the LCD screen to access
the DEEP EDIT MENU.
To navigate through the Deep Edit Menu,
footswitches 1,2,3 & 4 which correspond to Up, Down, Back,
Scroll/Enter respectively.
use
7
Advertisement
Table of Contents
