Simrad EQ33-2 Instruction Manual page 55

EQ33-2 SETUP menu
Group selection can be set to:
SIMRAD - auto-selected SimNet units from the Simrad group.
STAND-ALONE - manually selected data source and third party units.
Source: - depending on which products (sources) are connected, the
legend will indicate: 'none available', 'one available', 'multiple avail-
able' or 'owned, data type locked'.
GAIN+
Go to Position interface - step back with [GAIN-]
◄
GAIN-
Input:
Group selection:
Source (one available):
NMEA0183 output:
Waypoint location:
MENU
Waypoint location - see section 5.5.
NMEA0183 output - see also section 8.4.1 Description of sentences.
GAIN+
Go to Navigation interface - step back with [GAIN-]
◄
GAIN-
Input:
Group selection:
Source (one available):
MENU
Nodes
Position
Simrad GN33-2
Exit
Nodes Position
Simrad GN33-2
Exit
GAIN+
Navigation
SIMRAD
,Sn:0070B0
WPL
Accept
GAIN+
Navigation
SIMRAD
,Sn:0070B0
Accept
Chapter 8-9
►
∆
ON
ENT
►
∆
ENT