Table of Contents
Advertisement
Chapter 8-2
Restart of AUTO pulse/power:
Echo sampling:
Demo mode:
PAGE
MENU
Use the cursor key to move cursor around in the display
Select new values by means of the +/- keys
+/-
Confirm changes, or...
ENT
Abandon changes and exit display
MENU
Transducer - select transmitter frequency. Insert the depth (posi-
tion) of the transducer below surface.
Display can show: DEPTH BELOW KEEL / SURFACE / TRANS-
DUCER.
Data on NMEA-out from - select the frequency you wish to use for
transfer of data to connected navigator, plotter, etc.
Alarm for fish - set the strength from min. 000 (weak echo) to max.
099% (strong echo), and you can set it ON or OFF.
Depth DS fish - define a specific area below the water surface of
minimum and maximum depth for the fish alarm.
Depth DK alarm min. and max. - set up a depth limit alarm for
depth below keel.
Water profile - choose between SALT and FRESH water. The set-
ting will reflect on the:
Velocity of sound in water: SALT = 1470 meters per second and
FRESH = 1430 meters per second as standard. The standard set-
tings can be even more accurate by slightly increasing the number of
meters in warm waters and decreasing in cold waters.
More
(2/2)
Exit
EQ33-2 SETUP menu
20 sec.
BOTTOM
OFF
Scroll
ENT
Accept
Advertisement
Table of Contents
