Table of Contents
Advertisement
EQ33-2 Engine monitoring
information of the exact tilt of the outboard engine in percentage, or
of the Stern drive. No range or limitation can be entered.
To change the default ranges:
Load Engine status setup
ENT
Left engine source:
Right engine source:
Engine RPM range:
Engine RPM limit:
Oil pressure range:
Turbo pressure range:
Engine coolant temp. range:
MENU
Left engine source - use +/- to toggle between connected engines.
Right engine source - use +/- to toggle between connected engines.
Engine RPM range, default is 5000 RPM. Selectable in steps from
2500 to 12500 by means of the +/- keys.
Engine RPM limit, default is 4200 RPM. To control the limit manu-
ally, you can insert a new limit by means of the numerical keys.
When the limit is exceeded, the green fill color will turn red.
Oil pressure range, default is 100 Psi. Use numerical keys to enter
new range. Can be shown in Psi (10-125 Psi) or Pascal (69-862 kPa).
Turbo pressure range, default is 50 Psi. Use numerical keys to enter
new range. Can be shown in Psi (10-125 Psi) or Pascal (69-862 kPa).
Engine coolant temperature range, default is 120 degrees Celcius.
Use numerical keys to enter new range. Can be shown in Celcius
(40°C to 200°C) or Fahrenheit (104°F to 392°F).
Confirm entry or exit with [MENU] without making any changes
ENT
Engine status setup
Exit
∆
ENGINE 1
ENGINE 2
5000RPM
04200RPM
100Psi
050Psi
120°C
Accept
ENT
Chapter 6-3
Advertisement
Table of Contents
