Table of Contents
Advertisement
Chapter 2-2
Toggle between the four pre-set pages manually:
Press the [PAGE] key - again and again - to toggle between the 4
PAGE
pre-set pages, which as default are: Echo 200kHz display, Depth &
temperature diagram, Position display, and Highway display.
Toggle between the four pre-set pages automatically:
Hold the [PAGE] key depressed for two seconds to start a rotation of
PAGE
the 4 pages in intervals of 5 seconds - this interval can be changed,
refer to section 8.3. Press [PAGE] again to return to normal opera-
tion.
Example of how to change a pre-set page:
For instance, if you wish to have the Echo 50kHz display inserted in
the PAGE sequence instead of the Highway display:
Press the [PAGE] key until the Highway display appears
PAGE
Call up the menu bar, and...
MENU
then call up the Echo 50kHz display
3,1
The same display can be selected for view in more than one page
if it is selected via the menu. The hotkeys: [STND], [B-LCK] and
[ZOOM] will jump to the page with the desired display - if it's there,
and if it's not: it will replace the display in the active page.
EQ33-2 Fundamentals & initial start-up
Advertisement
Table of Contents
