Table of Contents
Advertisement
OM1099
This manual is written for use by the operator and/or the service technician and is designed to help these persons
to become fully knowledgeable of the truck and all its systems in order to keep it operating safely and efficiently.
All operators and maintenance personnel must read and understand the materials in this manual before operating
the truck or performing maintenance and/or operational checks on the truck. All safety notices, warnings and cau-
tions are to be understood and followed when operating or accomplishing repairs on the truck.
The first section is an introduction to the manual and contains a table of contents to locate specific areas of inter-
est. Other sections include Safety, Maintenance and Specifications.
The illustrations used in this manual are TYPICAL of the component shown and may not be an exact reproduction
of what is found on the truck.
A product identification plate is located on the frame in front of the right side front wheel and designates the truck
model number, product identification number (vehicle serial number), and maximum GVW (Gross Vehicle Weight)
rating.
The KOMATSU truck model designation consists of three numbers and one letter (i.e. 830E).
The three numbers represent the basic truck model.
The letter "M", when present, designates a Mechanical drive system;
The letter "E", when present, designates an Electrical wheel motor drive system.
The product identification number (vehicle serial number) contains information which will identify the original manu-
facturing bill of material for this unit. This complete number will be necessary for proper ordering of many service
parts and/or warranty consideration.
FOREWORD
Introduction - Section 10
Page 10-1
Advertisement
Table of Contents
