OM3072 2/13
Front Panel Assembly Below Radiator
General
Acoustic panelling has been installed below the radi-
ator attenuator.
Always use a lifting device that can handle the
load safely. Once the centre panel is installed, it
should be opened & closed by 2 people.
When installing or removing the centre panel
assembly, a pinch point is present between the
front panel flange and the tapped pad. Be mindful
of hand position.
1. Lower Panel
2. Seal
FIGURE 30-10. LOWER PANEL (BELOW RADIATOR)
3. Perforated Sheet
4. Insulation
Operating Instructions - Section 30
Do not pressure wash the sound attenuation sur-
faces. Malfunction and damage may occur,
reducing the effectiveness of the attenuators.
Approximate weights
Centre Panel Assembly- 50 kg (110 lb)
Maintenance
Refer to the Sound Attenuation System Service sec-
tion for inspection requirements.
5. Plate
6. Door Frame
Page 30-11