Chroma 62000B Series User Manual page 11

Revision History
The following lists the additions, deletions and modifications in this manual at each revision.
Date Version Revised Sections
Sep. 2006 1.0
Aug. 2007 1.1
Nov. 2007 1.2
Jan. 2008 1.3
Apr. 2011 1.4
July 2013 1.5
Complete this manual.
Add "Material Contents Declaration".
Modify the following sections:
− "Specification", "Function Keys" in the chapter of "Overview".
− "Setting for Mainframe and Power Module" in the chapter of
"System Operation & Usage".
− "Program Message Terminator (<PMT>)", "Commands of DC
Power Supply" and "CAN BUS Configuration" in the chapter of
"Communication Protocols".
Add the following sections:
− "Dimension Layout" in the chapter of "Overview".
− "Installation in Rack" in the chapter of "Installation".
− "Setting Over Voltage Protection" and "Application & Control
Method for 62000B Series DC Power Supply" in the chapter of
"System Operation & Usage".
− "Rule for Setting 62000B CAN BUS Parameter (Slave)", "Rule for
Setting CAN Adapter Parameter (Master)", "Description of CAN
Packet" and "Example Program" in the chapter of
"Communication Protocols".
Modify the following sections
– "Rear Panel" in the chapter of "Overview" to add "Local or
Remote Setting".
– "Maintenane & Cleaning" in the chapter of "Installation".
– "Setting Over Voltage Protection" in the chapter of "System
Operation & Usage".
Add the following section:
– "Notices When Connecting Conductive Load" in the chapter of
"System Operation & Usage".
Add the following section:
– "Notices When Applying Battery Charge" in the chapter of
"System Operation & Usage".
Modify the following section:
"CE Declaration of Conformity"
−
"Specification", "Front Panel" and "Rear Panel" figures in the
−
chapter of "Overview"
"Common Environment Conditions" in the chapter of "Installation"
−
for rated voltage
"Mainframe Parallel Connection" figure in the chapter of "System
−
Operation & Usage"
ix