Analog Devices MicroConverter ADuC706x Get Started Manual page 9

If you have an emulator, power up the evaluation board using the 9V power supply. Connect the evaluation board to the mIDAS-Link

and the mIDAS-Link to your PC's USB port using the provided USB cable.

Note: a green LED on the mIDAS-Link emulator blink a few times before staying on, indicating that the emulator is communicating

correctly with the PC.

In the "Debug" panel, select Use ... and choose RDI Interface Driver if you have a mIDAS-Link emulator. Select the settings button

and give the path to the mIDAS-Link dll C:\ADuC706xV1.0\ADuC706xV1.0\code\mIDASLinkRDI\mIDASLinkRDI.dll

If your development system doesn't include a JTAG emulator, use the simulator for this exercise.

Select the "configure RDI Driver" button. And in the "Flash" panel, tick all the options and in the Flash memory box, select your part

number. Ensure that the flash is configured at 0x80000. Press ok.

REV 1.0

http://www.elecfans.com 电子发烧友 http://bbs.elecfans.com 电子技术论坛

ADuC706x GetStarted Guide

(2) Keil µVision3 Integrated Development Environment

-- 9 --

www.analog.com/microconverter

Need help?

Do you have a question about the MicroConverter ADuC706x and is the answer not in the manual?

Microconverter aduc706x quickstart plus