Analog Devices MicroConverter ADuC706x Get Started Manual page 10

f. In the "Utilities" panel, select Use Target Driver for Flash Programming", chose "RDI Interface Driver" and tick the option "Update
Target before Debugging".
7. Press OK again, all the options should be properly configured to compile, assemble, link, download and debug using mIDAS-Link or the
simulator.
8. All the files relative to the project will be in the folder C:\ADuC706xV1.0\ code \Realview\ Timer
9. C:\ADuC706xV1.0\ code\\Realview\Timer\
From Windows Explorer or any other way, copy the files C:\ADuC706xV1.0\code\Realview\Timer\Timer0_IRQ.c and ADuc706x.s into the
following directory C:\Keil\ARM\Examples\ADIdemo.
10. To add the file to the project right click on the "Source Group" folder in the "Project Workspace" and select "Add Files to Group". Add the
files C:\Keil\ARM\GNU\Examples\ADIdemo\ Timer1_IRQ.c and ADuc706x.s. Also, add the file irq_arm.c from the directory
C:\Keil\ARM\INC\ADI.
REV 1.0
http://www.elecfans.com 电子发烧友 http://bbs.elecfans.com 电子技术论坛
(2) Keil µVision3 Integrated Development Environment
-- 10 --
ADuC706x GetStarted Guide
www.analog.com/microconverter