Analog Devices MicroConverter ADuC706x Get Started Manual page 11

Note that you can use under Project the option "Component, Environment, Books" to rename the target and add the file relative to your project.
11. Double click on the file name (Timer1_IRQ.c) in the Workspace window to open the source file.
2.4 Assembling/Compiling Code
12. To compile/link Timer1_IRQ.cclick on the
will be seen in the status window. If there are errors in your source code these will appear in the status window. To identify the line of code
which corresponds to the error double click on the error in the Output window and an arrow will appear highlighting the line of code in which
the error appears.
The ADuC7060.h file will automatically be included under Timer1_IRQ.c in the Project Workspace window.
13. Before the code can be downloaded to the MicroConverter the entire project must be built. This is done by clicking on the
target files) icon on the toolbar. It will also create a pot.elf file used by the debugger.
2.5 Downloading/Debugging Code
REV 1.0
http://www.elecfans.com 电子发烧友 http://bbs.elecfans.com 电子技术论坛
(translate current file) icon in the toolbar. The file should compile correctly and the following
(2) Keil µVision3 Integrated Development Environment
-- 11 --
ADuC706x GetStarted Guide
www.analog.com/microconverter
(rebuild all