Subscribe to Our Youtube Channel
Related Manuals for ESD DN-PC104/331
Summary of Contents for ESD DN-PC104/331
- Page 1 DN-PC104/331 PC/104-DeviceNet-Interface Hardware Installation Technical Data Installation and technical data DN-PC104/331 Rev. 1.0...
- Page 2 gmbh.
- Page 3 The changes in the user’ s manual listed below affect changes in the hardware, as well as changes in the description of the facts only. Chapter Alterations with respect to previous version First English version. Further technical changes are subject to change without notice. Installation and technical data DN-PC104/331 Rev. 1.0...
- Page 4 Installation and technical data DN-PC104/331 Rev. 1.0...
-
Page 5: Table Of Contents
4.2 CAN-TTL Signals (X402) ..........12 Installation and technical data DN-PC104/331 Rev. 1.0... - Page 6 Installation and technical data DN-PC104/331 Rev. 1.0...
-
Page 7: Overview
PC/104 Connector Fig. 1.1.1: Block-circuit diagram of the DN-PC104/331 module The DN-PC104/331 board is a designed for the PC/104-bus (PC/104 16 bits). It uses a 68331 microcontroller, which cares for the local management. The DeviceNet data is buffered in a local SRAM. -
Page 8: Pcb View With Connector Designation
Overview 1.2 PCB View With Connector Designation Fig. 1.2.1: Module view Installation and technical data DN-PC104/331 Rev. 1.0... -
Page 9: Hardware Installation
1. Switch off the computer and all connected peripheral devices (monitor, printer, ...). Switch off the other DeivceNet participants to that the PC104 module is to be connected. 2. Discharge yourself as described above if not yet done. Installation and technical data DN-PC104/331 Rev. 1.0... - Page 10 Coding switch = 'OFF' Coding switch is (address bit = 0) (address bit = 1) not evaluated Fig. 2.2.2: Default setting of coding switches and choices of addresses supported by Windows NT driver Installation and technical data DN-PC104/331 Rev. 1.0...
- Page 11 11. Connect the power supply of the computer (mains connector or fuse). 12. Switch on the power supply of the computer, the peripheral devices and the other DeviceNet participants. 13. End of hardware installation. Continue with software installation. Installation and technical data DN-PC104/331 Rev. 1.0...
-
Page 12: Summary Of Technical Data
Interrupt 1 out of 12 no restrictions in position in stack (Attention: No 8-bit- Stack position modules between DN-PC104 and PC/104-CPU !) Connectors PC/104 PCB connectors, 40-pole and 64-pole Table 3.2.1: PC/104-bus data Installation and technical data DN-PC104/331 Rev. 1.0... -
Page 13: Devicenet Interface
Phoenix Combicon style connector MSTB2,5/-GF-5,08 or DeviceNet connector equivalent one or two adapter boards with Phoenix Combicon style DeviceNet adapter option connector for installation in case panel Table 3.3.1: DeviceNet interface data Installation and technical data DN-PC104/331 Rev. 1.0... -
Page 14: Order Information
DN-PC104-ME *) C.2014.21 C.2014.08 and C.2014.55, C.2014.58 CAN-API-ME *) English manual for C.2012.11 C.2001.21 *) If order together with the module, the manual will be delivered free of charge. Table 3.5.1: Order information Installation and technical data DN-PC104/331 Rev. 1.0... -
Page 15: Connector Assignment
CAN- Shield CAN+ Signal Description: V+... power supply for CAN interface (U = 24 V ± 4%) V-... reference GND for V+ and CAN+/CAN- CAN+, CAN-... CAN signals Shield... shield signal (not connected) Installation and technical data DN-PC104/331 Rev. 1.0... -
Page 16: Can-Ttl Signals (X402)
Tx01* Rx00* Rx01* Tx10* Tx11* Rx10* Rx11* The DN-PC104/331-adaptor board version includes the DN-PC104/331-board, the DeviceNet adapter board, the ribbon cable, the fixing brackets and all necessary bolds, screws and washers. Case Panel DeviceNet Adapter 2 CAN Net 1 DeviceNet...
Need help?
Do you have a question about the DN-PC104/331 and is the answer not in the manual?
Questions and answers