Download Print this page
Front Runner SSDR012 Manual

Front Runner SSDR012 Manual

Drawer pick-up medium

Advertisement

Quick Links

Before you start, take a moment to familiarize yourself with the Fitting Instructions and the components received.
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
SSDR012_REV_A02
READ ME !
Thank you for purchasing Front Runner Drawer.
Refer to Page 2 for a list of all the components, quantities and tools required.
IMPORTANT WARNING!
Please call us if you have any questions about the installation of this product.
drawer pick-UP
medium
1
SSDR012
© 2020 FRONT RUNNER VEHICLE OUTFITTERS
ENG

Advertisement

loading

Summary of Contents for Front Runner SSDR012

  • Page 1 FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL. NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
  • Page 2: Tools Needed

    M6x19x1 Flat Washer TOOLS NEEDED D-Ring Track M8x16 Hex Bolt 10MM M8 Spring Washer 13MM 10MM M8 Flat Washer M8 Channel Nut 60mm C-Hook M6 Wing Nut Turnbuckle 6.5MM M6 Nyloc Nut FIGURE 1.1 SSDR012_REV_A02 © 2020 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 3 Secure the 4 D-Rings on both sides of the drawer as shown. Assemble the 6 eye-nuts and slide into place. SSDR012_REV_A02 © 2020 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 4 Mark and drill 6.5mm holes using the D-rings as a guide. Use the fasteners that are shown to secure the drawer to the vehicle. SSDR012_REV_A02 © 2020 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 5 Congratulations! You did it. Take a step back and admire your work! INSTALL OTHER VEHICLE AND RACK ACCESSORIES Now's the time to visit your favorite Front Runner Dealer in person or online. Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam...