Installation; Caution; Pole Mounting - Veilux SVEX-W125-3 Manual

3. INSTALLATION

3.1 Caution

Please carefully check before installation
a. If there is ex-marking license
b. The ex-marking satisfy environment use
c. All ex-proof and flameproof parts are complete enough for structure
d. Inside and outside earth are ready
Stop immediately while there is any unconformity

3.2 Pole Mounting

Mount base
pole
bolt
P3. make the concrete and install a pole
Make concrete base before install pole and
previously lay screws and some holes for cable out
under the base. Attention: Pole‟s type shall
changes according to monitoring scope, wind
speed and height. So please consult the supplier
while design the pole
SVEX-W125-3 (Ex) Explosion proof PTZ Camera Manual
SVEX-W125-3
Junction Box
Fix here
Cable out
hole
concrete
P4. mount camera and connect cable
As shown in Picture 2 and 4 make the camera bottom
cable through Cable Laid-in hole. The Junction
Box normally locates at a easy installation and
maintenance level with screw fixed, and must
be with ex-proof tube for protection or with armored
cable
Book
Ver: 2.3
Camera
cable
Junction box
Cable out