3.3 Bracket Mounting
Mount bracket
Junction box
P5.
Mount Bracket and Junction Box
Make a mount hole at proper level and fix the
bracket with screw. Junction Box shall be at
easy work level and cable goes through tunnel
or bridge to nearby Junction Box.
3.4 Cable Working
3.4.1 Ex Cable Use
a. As P 7, open the tighten screw on the base of camera, open ex cable screw joint for future use
SVEX-W125-3 (Ex) Explosion proof PTZ Camera Manual
Camera
cable
Cable tunnel or
bridge
P6.
Mount Camera and Connect Cables
Refer to Picture 2 to mount camera bottom, and
make the camera cable go through cable hole on
the bracket until reaching Junction Box. With
Ex-proof Flexibility Tube for protection or
armored cable
SVEX-W125-3
Cables go to Control
Room
Bridge
Book
Ver: 2.3
by
Tunnel
or
8