Muse M-1982 DJ - Speaker Manual

Please read the instruction carefully before operating the unit.

UNPACK THE UNIT

When you unpack your party speaker, make sure that you have removed all the accessories and information papers:

• Party speaker x1
• Remote control x1
• Wired microphone x1
• Wheels x2
• Assembly screw x6

Assembly 2 wheels with assembly screw on the bottom of unit as above direction.

LOCATION OF CONTROLS

MAIN UNIT

1. STANDBY: To turn unit on/standby mode
   MODE: To select function mode: Bluetooth, USB, TF, AUX, LINE.
2. PLAY/PAUSE button: Play/pause; Bluetooth pairing/disconnect function
3. LIGHT button: Lighting control button
4. EQ button: To select desired sound effects
5. MEGA BASS button: To enhance the bass power
6. MIC2/GT VOL knob: To adjust mic 2/guitar input volume
7. MIC1 VOL knob: To adjust mic1 input volume
8. MIC1 input Jack
9. MIC2/GT input Jack
10. AUX in jack (3.5MM)
11. USB PLAY port
12. TF CARD slot
13. USB CHARGE port (5.0V 1.0A)
14. ECHO knob
15. DELAY knob
16. MIC/GT button: To select input of mic or guitar
17. V.CHANGE: Voice changeable function
18. MIC FIRST button: To turn on/off Microphone sound priority effect
19. PREV/FR button: Skip to previous track; Search backward
20. NEXT/FF button: Skip to next track; Search forward
21. MUSIC VOL Knob: To adjust master volume
22. Display
23. Loud speakers
24. Handle
25. RCA input/output jacks
26. Power cord socket
27. POWER ON/OFF button
28. Wheels

REMOTE CONTROL

R1. : To turn unit on/ standby mode

R2. : To select function mode: Bluetooth, USB, TF, AUX, LINE.

R3. MUTE: To mute or restore sound

R4. MIC/GUITAR button: To select input of mic or guitar

R5. SPK. LIGHT: Lighting control button

R6. V.CHANGE: Voice changeable function

R7. TONE: To adjust bass/ treble

R8. M.FIRST: To turn on/ off Microphone sound priority effect

R9. VOL+/VOL-: To adjust master volume

R10. / : Search backward/forward

R11. / : Skip to previous track/ Skip to next track

R12. : Play/ pause; Bluetooth pairing/ disconnect function

R13. EQ: To select desired sound effects

R14. M.BASS: To enhance the bass power

R15. 0-9 buttons

R16. CONNT: Bluetooth pairing/ disconnect function

R17. REPEAT: To repeat playback

Installing Battery

Insert 2 "AAA/UM4" batteries to the remote control prior to use. Make sure to match their polarities (+/-) to the markings inside the compartment.

Before throwing any batteries away, consult your distributor who may be able to take them back for specific recycling.

NOTES:

• Never recharge the batteries, apply heat to them or take them apart.
• If the remote control is not going to be used for a long time, remove the battery to avoid damage caused by battery leakage corrosion.
• Attention should be drawn to the environmental aspects of battery disposal.
• Do not throw batteries in fire!
• Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

POWER SUPPLY

1. Connect the detachable AC cord (included) to the AC socket on the rear of the unit.
2. Plug the power cord into 100-240V ~ 50/60Hz AC outlet.

• Insert the plug of power cord into a standard wall outlet
• The included AC power cord is for use with this unit only. Do not use it with other equipment.
• When the unit is not going to be used for long time, disconnect the power cord from the AC outlet.
• Be sure to use it near the wall outlet. If a malfunction occurs, disconnect the plug from the wall outlet at once.
• If the AC power cord is plugged in, the apparatus is not completely disconnected from the main power source, even when the unit is turned off.
• AC power cord is used as the disconnect device. It shall remain readily operable and should not be obstructed during intended use. To be completely disconnected the apparatus from supply mains, the AC power cord of the apparatus shall be disconnected from the mains socket outlet completely.

TURNING UNIT ON/OFF

1. Press POWER (27) button to "ON" position, the unit will turn on automatically and the display will light up. You will hear the voice "Power on".
2. Press and hold (1/ R1) button to enter into standby mode. You will hear the voice "Power off".
3. Press (1/ R1) again to turn the unit on manually.
4. Press POWER (27) button to "OFF" position to turn off the unit. The display will light off completely after a few seconds.

Note: In a concern of saving energy, when playback has reached to the end or listening volume is set at a very low level and no control is operated on the device for a period of 20 minutes, the unit will automatically switch to Standby mode.

SELECTING FUNCTION

The function (Bluetooth, USB, TF, AUX, LINE) is selected by pressing (1/ R2) button repeatedly.
Note: Only insert USB device, TF Card or Aux in cable could switch into related modes.

AUDIO CONTROLS

• EQ: Press the EQ (4/ R13) button to toggle among the different sound effects: / (classic) / (rock) / / / / / (dance) / / . The selection will show on display for few seconds.
• MEGA BASS (5/ R14): It is a separated bass mode that can be selected when there is audio signal.
• TONE (R7): When there is audio signal, press this button to select treble or bass effect, then press VOL+/VOL- (R9) button to adjust the level as desired.
• MUTE: Press MUTE (R3) button on remote control to mute the sound. Press again to restore.

BLUETOOTH FUNCTION

The Bluetooth^® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by New One S.A.S is under license. Other trademarks and trade names are those of their respective owners.

1. Turn off the Bluetooth functionality of other devices that were paired with your unit.
2. When the unit is on, press (1/ R2) button repeatedly to select Bluetooth mode. "" will show on display.
3. On the Bluetooth device, enable Bluetooth and select "MUSE M-1982DJ" from the Device List. (Refer to the user manual of the device to be connected for detailed operations.) If the Bluetooth device prompts for a passcode, use "0000". Some Bluetooth devices will ask you to accept the connection. If the unit is paired properly, an indication sound can be heard.

Tip: If you want to connect your Bluetooth speaker to another Bluetooth audio device, press and hold the (2/ R12) button or press CONNT (R16) button to disconnect the device, and then follow the steps above to make a new connection.

• On some devices such as computers, once paired you must select the unit from the Bluetooth menu and choose "Use as Audio Device (stereo)" or similar.
• Pairing remains intact when the unit and/or your Bluetooth device is taken out of communication range. An active connection will be re-established when your Bluetooth device returns within range.
• When the unit is turned on again, it will automatically try to reconnect with the most recently paired Bluetooth device.

Using a Bluetooth Device

1. With a unit paired (see previous section), operate your Bluetooth device and its sound will be heard through the M-1982 DJ's speakers.
2. Press the button to pause playback. Press again to resume playback.
3. Select desired track with / .
4. Adjust the volume using the MUSIC VOL knob on unit or VOL+/ VOL- button on remote control. You can also adjust the volume on the device to which you are paired.

Hereby, NEW ONE S.A.S, declares that this MUSE M-1982 DJ is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at www.muse-europe.com

LISTENING TO USB/TF card

To insert an USB device (not included)

To insert an USB device (not included) connect your USB device to the USB port, the set will switch to "" mode automatically. If USB has already been inserted, press (1/ R2) button to switch to USB mode.

To insert a TF card (not included)

Insert your TF card in the card slot, the set will switch to "" mode automatically. If a card has already been inserted, press (1/ R2) button to switch to card mode.

Basic player functions

Play/pause: Press the button to pause playback. Press again to resume playback.

Skip/fast search:

1. Press to skip forward to next track.
2. Press to skip backward to previous track.
3. Press and hold or to search quickly within a track.

Repeat playback

Press REPEAT (R17) on remote control repeatedly to select a play mode.

• Repeat One: Display shows "" for 2 seconds.
• Repeat All: Display shows "" for 2 seconds.
• To cancel repeat playback, press REPEAT (R17) on remote control until "" appears.

Note

• The total number of MP3 files on the USB device and TF card should not exceed 9999.
• The device may not contain more than 99 directories.
• The reading time takes about a few seconds or more depending on the amount of MP3 files and folders on USB device and TF card.
• Do not put anything other than a USB device to the port of this unit. Other objects may damage the USB mechanism.
• Do not put anything other than a TF card to card slot of this unit. Other objects may damage the card mechanism.
• The USB socket must not be connected to the computer directly, for that may damage the unit.
• There are many USB devices and TF card in the market. We cannot guarantee to support all different models. Please try another USB device and TF card if your device is not supported
• The unit might not support all the multimedia files stored in USB or TF card because it includes some special playback procedure which might not be compatible with the procedure of this unit.

LISTENING TO AUXILIARY SOURCE

To 3.5mm AUX IN jack

1. Connect your auxiliary source (e.g. iPod/ iPad/ MP3 player) to the AUX in jack (3.5mm).
2. When the unit is on, press the (1/ R2) button repeatedly until the "" appears on display.
3. Start playback from your auxiliary source.
4. Adjust the volume to desired level.
5. To stop playback, disconnect your auxiliary source from the AUX in jack.

To RCA input jacks

1. Connect your auxiliary source (e.g. DVD player) to the INPUT L/R jacks on back of unit with RCA audio cable (cable not included).
2. Press (1/ R2) button repeatedly to select line in mode. The display will show "".
3. Start playback from your auxiliary source.
4. Adjust the volume to desired level.
5. To stop playback, disconnect your auxiliary source from the INPUT L/R jacks.

STEREO PAIRING

This function makes it possible for you to get stereo surround sound quality. It requires two Bluetooth speakers M-1982 DJ to realize the real Bluetooth radio channel wireless separation, therefore, you've got to purchase two M-1982 DJ.
Tips: It is suggested that the distance between the main speaker and secondary speaker is within 4 meters.

Strictly follow the steps below to ensure the stereo pairing function works properly.

1. Turn on the two Bluetooth speakers M-1982 DJ. Press MODE (1) button repeatedly to select Bluetooth mode for both speakers.
2. When both speakers are in pairing mode, press MODE (1) button twice on one Bluetooth speaker which will become the main speaker (left channel), the display will show "" (searching), then it will search and connect to the secondary speaker (right channel). They will recognize the left and right channel automatically. You will hear the indication voice "Left Channel" and "Right Channel" at the same time when the two speakers are connected successfully. And the display will show "BT-L" (Left) and "BT-R" (Right).
3. Press MODE (1) button repeatedly on main speaker to select the desired main source: Bluetooth, USB, TF, LINE IN or AUX. If Bluetooth mode is selected, enable your Bluetooth device and select "MUSE M-1982DJ" from the device list. If the unit is paired properly, an indication voice can be heard. (For specific operations of each mode, refer to the previous sections.)
4. Press button on either speaker to pause playback. Press again to resume playback.
5. Press MODE (1) button twice on either speaker to disconnect the stereo pairing. The unit will continue playback in main speaker.

Note: In stereo pairing mode, only main speaker could perform mode change, volume control, and light effect ect.

PARTY CHAIN FUNCTION

You can connect multiple audio using audio cords (not supplied) in a chain to create a more interesting party environment and to produce higher sound output. Activate a unit in the chain to be the "Party Host" and share the music. Other units will become "Party Guest" and play the same music as the "Party Host". As for "Party Host", it could switch to BT, Aux, Line in, TF or USB mode, for "Party Guest", it has to be on "Line in" mode.

Party Chain

USB CHARGING

This unit is equipped with a built-in USB charging port (Output: 5.0V 1.0A) for recharging your mobile device (e.g. Smartphone, tablet, etc.)
Simply plug the USB charging cable (not included) into the USB charging port and connect it to your mobile device.

USING THE MIC/GUITAR JACK

The MIC2/GT jack of unit can be compatible with microphone set and guitar.

Guitar playback

1. Press (1/R1) button to turn on the unit.
2. Plug your electronic guitar into the MIC2/GT (9) jack on the unit.
3. Start to play your guitar and the sound will be output from the unit.
4. Press MIC/GT (16/R4) button repeatedly to select guitar input option. Then rotate MIC2/GT VOL knob to adjust the desired volume level.
5. To stop playback, disconnect your guitar from the MIC2/GT (9) jack.

SINGING THROUGH MIC JACK

1. Sing along with the music by plugging the microphone into the MIC1 or MIC2/GT jack on the unit.
2. MIC1 VOL: Rotate the MIC1 VOL directly to adjust the microphone volume as desired.
   MIC2 VOL: Press MIC/GT button repeatedly to select microphone input option. Then rotate MIC2/GT VOL knob to adjust the desired microphone volume level.
3. MIC FIRST (18/ R8): Press this button to make the microphone volume louder than the music volume during singing. Press the button again to resume.
4. DELAY (15): Rotate this knob directly to adjust microphone voice delay time.
5. ECHO (14): Rotate this knob directly to adjust the echo intension.

• If the microphone is placed near the loudspeaker, a howling effect (acoustic feedback) may occur. If this happens, place microphone away from the loudspeaker.
• Tapping or dropping the microphone can permanently damage your microphone. Resist the urge to swing the microphone around by the cord.

Voice changeable function

This unit can transform your voice to other sound effects.

1. Plug the microphone into MIC1 jack or MIC2/GT jack.
2. Press V.CHANGE button repeatedly to select your desired voice effects: Woman voice, man voice, baby voice, monster voice, primary voice.
3. The voice will change when you sing through the microphone.
4. MIC1 VOL: Rotate the MIC1 VOL directly to adjust the microphone volume as desired.
   MIC2 VOL: Press MIC/GT button repeatedly to select microphone input option. Then rotate MIC2/GT VOL knob to adjust the desired microphone volume level.

Note: If you want to sing without any voice effect, select "primary voice".

CHOOSING THE COLOR LIGHT MODE

When the unit is on, press (3/ R7) button repeatedly to choose the mode as desired, there are 14 kinds of modes on speaker light. Press and hold (3/ R7) button to turn off the light.

TECHNICAL SPECIFICATION

POWER SUPPLY: AC100-240V ~ 50/60Hz
Consumption: 120W

BLUETOOTH
Bluetooth Version: V5.0
Bluetooth: 2.402-2.48GHz
RF Output Power: 4.138 dBm
Bluetooth working distance: Up to 10 meters measured in open space. (Wall and structures may affect range of device)

Specifications are subject to change without notice.

TROUBLE SHOOTING GUIDE

Should this unit exhibit a problem, check the following before seeking service:

No Power

• Make sure unit is connected to AC power.

No Sound – General

• External device's volume is set to minimum; raise volume.
• The M-1982DJ's volume is set to minimum; raise volume.

The Bluetooth device cannot pair or connect with the unit.

• You have not activated the Bluetooth function of your device. Refer to the user manual of your device to activate Bluetooth function.
• The unit is not in pairing mode. Press and hold the button until the Bluetooth indicator blinks fast.
• The unit is already connected with another Bluetooth device; disconnect that device and then try again.

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of electric shock, do not open the device, there is no party inside for the user. Refer all servicing to qualified personnel.

The lightning with the arrow symbol in the triangle is a warning sign alerting the user to "dangerous voltage" inside the unit.

The exclamation point in the triangle is a warning sign alerting the user of important instructions accompanying the product.

The Caution mark is located at the back of the device.

• The use of apparatus in moderate climates.
• The Marking plate is located at the back of the device.
• Make sure to have a minimum distance of 5 cm around the unit for sufficient ventilation.
• Ensure that the ventilation openings is not covered with items such as newspapers, tablecloths, curtains, etc.
• Do not place naked flame sources, such as lighted candles on the apparatus.
• Do not expose this appliance to dripping or splashing water.
• Do not place objects filled with liquids, such as glass, vase on the device.
• Do not throw batteries into fire! Respect the environment when disposing of used batteries.
• Batteries should not be exposed to excessive heat such as sunshine, fire or other similar heat source.
• The power plug is used as a disconnect device and must be easily accessible. To be completely disconnected from the power, the plug of the appliance should be disconnected completely. The socket must not be obstructed and should be easily accessible during intended use.
• Under the influence of fast transient and / or electrostatic electric phenomenon, the product may malfunction and the user must perform a power reset of the device.
• The normal function of the product may be disturbed by strong Electro-Magnetic Interference. If so, simply reset the product to resume normal operation by following the instruction manual. In case the function could not resume, please use the product in other location.

If in the future, you need to get rid of this product, please note that Waste electrical products should not be disposed of with household waste. Recycling facilities exist. Check with your municipality or ask your dealer for advice. (Directive for Waste Electrical and Electronic Equipment)

NEW ONE S.A.S
10, Rue de la Mission, 25480 Ecole Valentin, France