Husqvarna Automower 305 Operator's Manual page 30

3. Use the arrow buttons to select country and then
push the BACK button.
To set the unit format
To get access to the menu in the
1. Do steps 1–3 in
display of the product on page 22 .
2. Use the arrow buttons and the OK button to move
through the menu structure
Unit format.
3. Use the arrow buttons to select unit format and
then push the BACK button.
To reset all user settings
To get access to the menu in the
1. Do steps 1–3 in
display of the product on page 22 .
2. Use the arrow buttons and the OK button to move
through the menu structure
Reset all user settings .
3. Use the right arrow button to select
reset of all user settings?
4. Push the OK button to reset all the user settings.
Note:
Security level, PIN code, Loop signal,
Messages, Date & Time, Language and Country
settings are not reset.
The About menu
About menu displays information about the product,
The
for example serial number and firmware versions.
4.2.8.5 Frost Guard
The grass is more sensitive to wear if there is frost on
the grass. If the Frost Guard is enabled, the product
does not start to cut the grass if the temperature is less
than 5° C / 41° F.
Note:
The frost sensor is at the inner side of
the chassis. There can be a temperature difference
compared to the ambient temperature.
To set the Frost Guard
To get access to the menu in the
1. Do steps 1–3 in
display of the product on page 22 .
2. Use the arrow buttons and the OK button to move
through the menu structure
> Frost Guard .
3. Push the OK button to select
4. Push the BACK button.
4.2.9 Accessories
30 - Product settings
Settings > General >
Settings > General >
Proceed with
Settings > Installation
Frost Guard .
Settings for accessories mounted on the product can be
made in this menu.
4.2.9.1 Information
This menu handles accessories mounted on the
product. Contact your local Husqvarna representative for
more information on available accessories.
®
4.2.9.2 Automower Connect
The product can connect to mobile devices that
®
have the Automower Connect app installed. The
®
Automower Connect app has Long-range cellular
connectivity and Short-range Bluetooth
®
Automower Connect app on page 22 .
Refer to
Note:
®
Automower Connect is always connected to
your product while the mobile device have connection
with the mobile network and the product is switched on.
Note:
All countries do not support Automower
Connect because of regional specified cellular systems.
The included Automower
applies if there is a third part sub-supplier of 2G/3G/4G
available in the operational area. In some countries
®
Bluetooth is not available because of legal reasons.
4.2.9.3 To avoid collisions with the Automower
The wear on the product and the Automower
decreases when you select
To get access to the menu in the
1. Do steps 1–3 in
display of the product on page 22 .
2. Use the arrow buttons and the OK button to move
through the menu structure
house > Avoid collisions with mower .
Note:
Avoid collisions with mower is selected it
If
can result in grass that is not cut around the charging
station.
4.2.9.4 Terrain kit
When using the terrain wheels with weights, special
settings are needed to compensate for more weight.
To set the Terrain kit
To get access to the menu in the
1. Do steps 1–3 in
display of the product on page 22 .
2. Use the arrow buttons and the OK button to move
through the menu structure
kit > Enable Terrain kit .
3. Push the OK button to enable or disable the
function.
4. Push the BACK button.
®
connectivity.
®
®
Connect life-time service only
®
house
®
house
Avoid collisions with mower .
Accessories > Mower
Accessories > Terrain
1462 - 008 - 20.02.2023