Husqvarna Automower 305 Operator's Manual page 26

Note:
The sum of Area 1-3 must be 100% or
less. If the sum is less than 100%, the product
sometimes straddles the guide wire and starts to
mow at the charging station.
9. Push the BACK button.
To set the System Passage Mowing function
Note:
To prevent that the grass in the narrow
passage is worn, Husqvarna recommends to set a low
Systematic Passage Mowing .
percentage for the
To get access to the menu in the
1. Do steps 1–3 in
display of the product on page 22 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Coverage > Area 1-3 .
3. Use the arrow buttons to select the area.
4. Push the OK button.
5. Measure the distance from the charging station
to the beginning of the narrow passage. Measure
along the guide wire. Refer to
distance from the charging station on page 26 .
Note:
Make sure that the distance to the
Systematic Passage Mowing is set inside the
narrow passage.
6. Push the arrow buttons to select the distance.
7. Push the OK button.
8. Use the arrow buttons to select the % of the
cutting time that the product must start the narrow
passage cutting.
9. Use the arrow buttons and the OK button to select
More > Systematic Passage Mowing .
10. Push the OK button to enable
Mowing .
11. Push the BACK button.
To do a test of the Lawn Coverage function
1. Put the product in the charging station.
To get access to the menu in the
2. Do step 1-3 in
display of the product on page 22 .
3. Use the arrow buttons and the OK button to
move through the menu structure
Coverage > Area > More > Test .
4. Push the OK button.
5. Push the START button.
6. Close the hatch.
7. Make sure the product can find the area.
To measure the distance from the charging station
1. Put the product in the charging station.
26 - Product settings
Settings > Lawn
To measure the
Systematic Passage
Settings > Lawn
To get access to the menu in the
2. Do steps 1–3 in
display of the product on page 22 .
3. Use the arrow buttons and the OK button to
move through the menu structure
Coverage > Area > How far?
4. Use the arrow buttons to set 500 m / 500 yd as a
distance.
5. Push the OK button.
6. Use the arrow buttons and the OK button to
move through the menu structure
Coverage > Area > More > Test .
7. Push the OK button.
8. Push the STOP button when the product is at
the distance you select to measure. The distance
shows in the display.
To disable or enable the Lawn Coverage function
Lawn Coverage function for each
Disable or enable the
area.
To get access to the menu in the
1. Do steps 1–3 in
display of the product on page 22 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Coverage > Area > Disable .
3. Push the OK button.
4. Push the BACK button.
To reset the Lawn Coverage settings
Lawn Coverage settings for each area
You can reset the
and use the factory setting.
To get access to the menu in the
1. Do steps 1–3 in
display of the product on page 22 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Coverage > Area > More > Reset .
3. Push the OK button.
4.2.7.2 Methods for the product to find the charging
station
The product has 3 search methods to find the charging
station:
• Irregular - The product operates in the work area
until it finds the signal of the charging station.
• Guide wire - The product operates in the work area
until it finds the signal of the charging station or
the guide wire. If it finds the guide wire the product
moves along the guide wire to the charging station.
• Boundary wire - The product moves in the work
area until it finds the signal of the charging station,
the guide wire or the boundary wire. If it finds
the boundary wire, the product moves along the
boundary wire to the charging station.
The factory setting is set to mix the 3 search methods.
When the battery is low the product starts to search for
the charging station with the irregular method for 3 min.
After 3 min the product changes search method to the
Settings > Lawn
Settings > Lawn
Settings > Lawn
Settings > Lawn
1462 - 008 - 20.02.2023