Operation Buttons - Vivax M-DESIGN R32 User Manual

VIVAX
Operation of buttons
TURBO Button
Active/Disable Turbo function. Turbo function enables the unit to reach the preset temper-
ature at cooling or heating operation in the shortest time(if the indoor unit does not support
this function, there is no corresponding operation happened when pressing this button.)
SELF CLEAN Button
(applicable to Rg57(A2)A3/BGEF)
Active/Disable Self Clean function
ON/OFF Button
This button turns the air conditioner ON and
OFF.
MODE Button
Press this button to modify the air conditioner
mode in a sequence of following:
NOTE Please do not select HEAT mode if the machine
you purchased is cooling only type. Heat mode is not
supported by the cooling only appliance.
FAN Button
10
Used to select the fan speed in four steps:
ON
11
NOTE: You can not switch the fan speed in
OFF
AUTO or DRY mode.
12
SLEEP Button
 Active/Disable sleep function. It can maintain
14
the most comfortable temperature and save
energy. This function is available on COOL,
HEAT or AUTO mode only.
 For the d
MANUAL.
NOTE: While the unit is running under SLEEP
mode, it would be cancelled if MODE, FAN SPEED
or ON/OFF button is pressed.
FRESH Button
(applicable to RG57A3/BGEF and (RG57D/BGE)
Active/Disable FRESH function. When the
FRESH function is initiated, the Ionizer/ Plasma
Dust Collector(depending on models) is
energized and will help to remove pollen and
impurities from the air.
AUTO LO MED
,
etail, see sleep operation in USER
ENG
HIGH