Function Buttons - Vivax ACP-12PT35AEH R290 User Manual

Function buttons

Before you begin using your new air conditioner, make sure to familiarize yourself
with its remote control. The following is a brief introduction to the remote control
itself. For instructions on how to operate your air conditioner, refer to the How to
Use Basic Functions section of this manual.
ON/OFF
Turns the unit on or off.
MODE
Scrolls through operation
modes as follows:
AUTO COOL DRY
HEAT FAN
NOTE:
Please do not select
HEAT mode if the
machine you purchased
is cooling only type.
Heat mode is not
Supported by the
cooling only appliance.
FAN SPEED
Selects fan speeds in
the following order:
AUTO LOW
MED HIGH
Press this button, the
Ionizer is energized
And Will help to remove
Pollen and impurities
from the air.
SLEEP
Saves energy
during sleeping
hours.
NOTE:
Swing, Ion and Follow me features are optional. RG57H1(B)/BG(C)E-M without med fan speed.
ION
SWING
Starts and
stops louver
movement.
TEMP
Increases temperate in 1°C(1°F)
increments. Max. temperature is
30°C(86°F).
TEMP
Decreases temperate in
1°C(1°F)
increments. Min. temperature is
17°C(62°F).
NOTE: Press and hold and
buttons together for 3 seconds
will alternate the temperature
display between the OC & OF
scale.
SHORT CUT
Sets and activates your
favorite pre-settings.
TIMER ON
Sets timer to turn unit on (see
How to Use Basic
Functions for instructions)
TIMER OFF
Sets timer to turn unit
off (see How to Use
Basic Functions for
instructions
LED
Turns indoor unit's LED
display on and off. If you are
sensitive to light when you go
to sleep, you can press the
LED button to turn off the LED
FOLLOW ME
display on the unit. Press the
Temperature
button again to turn it back on.
sensing
and room
temperature
display button.
3